Pre-Heating Aluminum for Welding

by Steve (Slagg)
(Carson City, NV USA)

Sometimes when welding aluminum, thick to thin, it helps to pre-heat, or for that matter, any heavy thickness of aluminum, to make the process much easier. A trick I use so I don't get it to hot, and I don't have any way of monitoring temp., is I use an oxy acetylene torch outfit and just light off the acetylene and blacken the area with soot. Then with the flame set back with oxy for heating, evenly heat area until the soot disappears, and weld away. I think that gets it right around 1000 deg. but not hot enough to melt it. With thick to thin concentrate most of the heat on the thickest material.

Return to Share a Welding Tip.

Enjoy this page? Please pay it forward. Here's how...

Would you prefer to share this page with others by linking to it?

  1. Click on the HTML link code below.
  2. Copy and paste it, adding a note of your own, into your blog, a Web page, forums, a blog comment, your Facebook account, or anywhere that someone would find this page valuable.