by Randy
(LA,Calif)
I always seem to have a problem with stainless sheet metal warping when I weld it. It appears that many other people do not have that problem (or so it seems).
What am I doing wrong. (I am using the syncrowave)
Thanks
--------------------------------------------------
Stainless just warps some no matter what.
a few ways to minimize warping are:
get in and get out as quickly as possible...you should be traveling within 3 seconds of the arc starting.
use chill bars if you can
use a small gap if you can
back step weld in short steps
Comments for Stainless Warp
|
||
|
||